Rapid Advance Feature

The Rapid Advance feature allows the owner to quickly advance through active cycles or advance into a cycle from the ready mode.

How to Exit Rapid Advance Feature

1.Advance through the cycles until reaching the ready mode. Refer to Figure 2.

How to Enter Rapid Advance from Ready Mode

1.If control is in Ready Mode, control must be put into Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “rAPd” appears in the display.

3.Press the START (enter) keypad. The VFD will display cycle time and the START (enter) keypad LED will flash.

4.Press the START (enter) keypad to start cycle.

How to Enter Rapid Advance During an Active Cycle

1.Be certain service door is open.

2.While pressing and holding the NORMAL keypad with one hand, press the HOT keypad with the other hand. There will be no change on the VFD display.

Control may be in an active cycle or in the ready mode to use the Rapid Advance feature.

While in the Rapid Advance Mode, pressing the START (enter) keypad will advance the washer to the next cycle step. The cycle indicator lights will tell which cycle step the washer is in.

For Example: If the washer is in the wash fill/agitate cycle step, pressing the START (enter) keypad will advance the washer into the WASH PAUSE cycle step.

Continue pressing the START (enter) keypad until the cycle is completed.

NOTE: The Rapid Advance/Diagnostic Access option must be turned on for Rapid Advance to work. Refer to option 47 in Programming NetMaster.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

123