Default Washer Settings
Cycle | PERM PRESS |
Wash Water Temperature | WARM |
Rinse Water Temperature | COLD |
Special Vends | OFF. All items zero. |
Signals: |
|
Keypress | ON |
End of Cycle | OFF |
Coin Input/Card Insertion | ON |
Remove Card | ON |
Coin #1 Value | .25 |
Coin #2 Value | 1.00 |
Power Fail Reset | OFF/5 minutes |
Control Configuration: |
|
Daylight Savings | ON |
Wash Temp Indicator | SELECT (OFF) |
ON | |
Decimal Point | ON |
Auto Collect | ON |
EC Power Fail | OFF |
The cycle listed is the default PERM PRESS cycle programmed in at the factory. This cycle can be made longer or shorter by reprogramming the agitate times. Refer to Programming NetMaster section to change these times. All other times are not programmable.
| Cycle | Default |
Wash Fill | 2:00 |
Wash Agitate | 10:00* |
Wash Pause | 0:10 |
Wash Pump | 0:00 |
Wash Spin #1 | 1:30 |
Wash Spin/Spray | 0:30 |
Wash Spin #2 | 1:30 |
Extra Rinse Fill | 0:00 |
Extra Rinse Agitate | 0:00* |
Extra Rinse Pause | 0:00 |
Extra Rinse Pump | 0:00 |
Extra Rinse Spin #1 | 3:00 |
Rinse Fill | 2:00 |
Rinse Agitate | 4:00* |
Rinse Pause | 0:10 |
Rinse Pump | 0:00 |
Rinse Spin #1 | 1:30 |
Final Spin | 6:00* |
* = Programmable Times
210140 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 131 |