Programming NetMaster

28. Set Real-Time Clock Day “+028”

This option allows the owner to set NetMaster’s internal clock to the correct day of the week.

How to Program the Clock Day

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 114

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+028” appears in the VFD. Refer to Figure 115.

C784I

Figure 115

4.When “+028” appears in the VFD, press the START (enter) keypad. The current day of the week will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the day until correct. Refer to Figure 116.

NOTE: Sunday is considered day one (001), Monday is day two (002) and so on.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 116

6.Press the START (enter) keypad when the correct day appears in the VFD. The next option, “+029”, will appear in the VFD.

NOTE: To program “+029” (Set Real-Time Clock Date), refer to option 29. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

72

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140