49. Special Cycle Option “+049”

This option allows the owner to program the machine to offer extra wash time, extra rinse time, warm rinse, or any combination of the above to the customers for an added vend price.

How to Program Special Cycle Option

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 177

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+049” appears in the VFD. Refer to Figure 178.

C812I

Figure 178

4.When “+049” appears in the VFD, press the START (enter) keypad. A number will appear in the VFD. This number corresponds to the current Special Cycle Option Programming Value.

Programming NetMaster

5.Locate the desired number in the first column of Table 8 on the following page.

6.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct. Refer to Figure 179.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 179

7.Press the START (enter) keypad when the correct number appears in the VFD. The next option, “+050”, will appear in the VFD.

NOTE: To program “+050” (Special Cycle Extra Wash Time), refer to option 50. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

97