14.Special Vend A End Month “+014”

This option allows the owner to set the month that Special Vend A will end.

How to Program Special Vend A End Month

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 58

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+014” appears in the VFD. Refer to Figure 59.

C776I

Figure 59

4.When “+014” appears in the VFD, press the START (enter) keypad. The current end month will appear in the VFD.

Programming NetMaster

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the end month to the desired month. Refer to Figure 60.

If “0” is selected and Special Vend A is on, Special Vend A will occur at the time or day of week selected, regardless of the month.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 60

6.Press the START (enter) keypad when the correct month appears in the VFD. The next option, “+015”, will appear in the VFD.

NOTE: To program “+015” (Special Vend A End Date), refer to option 15. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

49