Procedures that are done by the customer before the upgrade
6.To continue the backup, press Enter. Note that a CMSADM backup can take several hours, depending on the speed of the system and the tape drive.
If only one tape is required, the system displays the following message:
Backing up files...
..................................................
..................................................
(dots continue to display as the system is backed up)
..................................................
XXXXXXblocks
Tape verification XXXXXX blocks
Please label the backup tape(s) with the date and the current CMS version (r3vXxx.x)
7.Do one of the following:
●If only one tape is required, continue with Step 11.
●If more than one tape is required, the system displays the following message, and you continue with Step 8:
Backing up files...
..................................................
..................................................
(dots continue to display as the system is backed up)
..................................................
End of medium on “output”.
Please remove the current tape, number it, insert tape number X,
and press ENTER
8.Insert the next tape and press Enter to continue. When you insert the next tape, allow it to rewind and reposition before you press Enter. Repeat this step for any additional tapes.
After the system completes the backup, the system displays the following message:
XXXXXXXblocks
Tape Verification Insert the first tape Press Return to proceed:
Issue 3.0 February 2002 17
