Upgrading the system
5. Continue with Shutting down and rebooting the system.
!
CAUTION:
If you receive an error message, such as the following, a failure occurred in one of the installation scripts. Note the name of the script (in this example, install_saip) and see Troubleshooting upgrade failures on page 65 to recover from this error.
ERROR[1]: FUNCTION install_saip() FAILED at Thu Jul 13 12:54:23 MDT 2000 script /adminsave/init.d/S04install_saip failed
Shutting down and rebooting the system
To shut down and reboot the system:
1.Enter:
/usr/sbin/shutdown -y -i0 -g0
The system displays the ok prompt.
2.Enter the following command at the ok prompt:
The system displays the ok prompt.
3.Enter: boot
This reboots the system and brings up the switch links. Ignore any warning messages.
4.Log on as root using the original password for the old system.
5.If using the CMS console on site, open an XTERM window if one is not displayed. Move the cursor into the window and click the left mouse button to activate that window.
6.Remove the “CVUE Extract” tape. This tape can be reused by the customer as a backup tape.
7.Continue with Verifying the status of the disks.
Issue 3.0 February 2002 53
