Procedures that are done by the customer after the upgrade
R3V8
To copy specific files from an R3V8 system:
1. Insert the most recent CMSADM backup tape from the old system into the tape drive.
2. Enter:
cd /
3. Enter the following command for each file you want to copy:
cpio
The <path>/<file_name> is the relative path to the file being copied.
The X is either 0 or 1, depending on how many tape drives are connected to the system. If you have only one tape drive, use 0. If you have more than one tape drive, use the following commands to determine which tape drive you should use:
mt -f /dev/rmt/0 status mt -f /dev/rmt/1 status
The tape drive that contains the CMSADM backup tape reports a status similar to the following:
<tape drive | model name>: |
|
| |
sense key(0x6)= Unit Attention | residual= 0 | retries= 0 | ||
file no= | 0 | block no= 0 |
|
|
|
|
|
|
|
For example, a command to copy the file /accounting/invoices would be:
cpio
Issue 3.0 February 2002 71
