Upgrading an Enterprise 3000 to CMS R3V9
Verifying the status of the disks
After the system boots up, you must check the status of the disks.
1.Enter:
. /opt/informix/bin/setenv
2.Enter:
onstat -d egrep “X” pg
The system should not display anything except the command prompt. If any lines display, the disk requires maintenance. Escalate through normal channels.
3.Continue with Removing temporary ACDs.
Removing temporary ACDs
If you created one or more temporary ACDs during the extract process of the upgrade, you must now remove those ACDs. If you did not add any temporary ACDs, continue with Verifying CMS permissions.
To remove a temporary ACD:
1.Enter: cmsadm
The CMS Administration menu displays.
2.Enter the number that corresponds to the acd_remove option.
3.Enter the ACD number to remove.
The system displays a warning message.
4.Enter: y
5.Continue with Verifying CMS permissions.
Verifying CMS permissions
To verify that the CMS permissions were preserved during the upgrade:
1.Enter:
pkgchk -n cms
Correct any problems with CMS permissions that are displayed.
2.Continue with Turning on CMS.
54 CentreVu CMS R3V9 Sun Enterprise 3000 Computer CVUE Instructions
