H10 Skip Frequency Enable

Range: 0 - 1

Default: 0

Access Configurable

See also:

H11-H16

Set this parameter = 1 to enable the skip frequency settings configured in H11 thru H16. When it is desirable to avoid resonance attributable to the natural frequency of a mechanical system, these parameters allow resonant frequencies to be skipped. Three different areas of Skip frequency High/Low limit can be set. During acceleration or deceleration however, the run frequency within the set area is valid.

H11 Skip Frequency Low Limit 1

H12 Skip Frequency High Limit 1

H13 Skip Frequency Low Limit 2

H14 Skip Frequency High Limit 2

H15 Skip Frequency Low Limit 3

H16 Skip Frequency High Limit 3

Range:

0.1-400 [Hz]

Default:

H11=10, H12=15, H13=20, H14=25, H15=30, H16=35

Access

Configurable

See Also:

H10

Note:

Parameters H11-H16 are only viewable when H10 – Skip

 

Frequency = 1 (Enabled).

 

 

Run frequency cannot be set within the range of H11 thru H16. The frequency values of the low numbered parameters cannot be set above those of the high numbered ones. Settable within the range of Frequency High and Low Limits (P35 and P36).Sets the lower limit of frequency range 1 to skip.

Freq.

 

 

H16

 

 

H15

 

 

H14

 

 

H13

 

 

H12

 

 

H11

10V

V1(Voltage input)

0

20mA I (Current input)

Run

 

 

command

 

 

Freq. Up setting

Freq. Down

setting

7-42

VS1MD AC Drive User Manual

Page 86
Image 86
Baldor VS1MD instruction manual H10 Skip Frequency Enable Range 0 Default, See also H11-H16

VS1MD specifications

The Baldor VS1MD is a state-of-the-art variable speed drive designed for demanding applications requiring seamless control of induction motors. This drive exemplifies Baldor’s commitment to providing efficient and reliable solutions for industrial automation. Balancing user-friendliness with advanced engineering, the VS1MD addresses the needs of both new installations and retrofitting existing systems.

One of the most notable features of the VS1MD is its compact design. Engineered to save space without compromising performance, this drive can fit into tight installations, making it an ideal choice for crowded panels or machinery. The drive is available in a range of power ratings, accommodating various motor sizes and operational requirements.

The VS1MD incorporates advanced digital signal processing technology, ensuring precise control of motor speed and torque. The adaptive control algorithm optimizes performance across varying load conditions, resulting in smoother operation and improved energy efficiency. This technology not only enhances performance but also enhances the drive’s lifespan by minimizing stress on the motor and related components.

User interface is another strong point of the VS1MD. The drive features a clear display and intuitive controls, allowing for easy setup and troubleshooting. Operators can easily navigate through various parameters, ensuring quick adjustments and fine-tuning to meet specific performance needs.

For enhanced connectivity, the VS1MD includes multiple communication options such as Modbus RTU and CANopen protocols. This flexibility enables integration into existing networks and facilitates communication with other automation devices. The drive can also be seamlessly connected to centralized control systems, allowing for comprehensive monitoring and management.

Safety features are paramount in ensuring reliable operation in industrial environments. The Baldor VS1MD includes built-in protection mechanisms against common issues such as overvoltage, overcurrent, and overheating. These safety measures safeguard both the drive and the motor, reducing the likelihood of costly downtime and repair.

Furthermore, the VS1MD is designed with energy efficiency in mind. It can contribute to significant energy savings, reducing operational costs while promoting a greener approach to industrial processes. This drive effectively meets the requirements of industries that prioritize sustainability alongside performance.

In conclusion, the Baldor VS1MD is a versatile and powerful variable speed drive that stands out due to its compact design, advanced control technologies, user-friendly interface, robust safety features, and energy-saving capabilities. It is an exemplary choice for industries looking to enhance their automation processes with reliable and efficient motor control solutions. Whether applied in manufacturing, HVAC, or other sectors, the VS1MD proves to be a valuable asset for optimizing operational performance.