13 Printing photos from a digital camera (MFC-9320CW only)

Your Brother machine supports the PictBridge standard, allowing you to connect to and print photos directly from any PictBridge compatible digital camera.

Even if your camera is not in PictBridge mode or does not support PictBridge, you can connect your camera as a normal storage device. This enables you to print photos from your camera. Follow the steps for “Printing data from a USB Flash memory drive (MFC-9320CW only) on page 99”.

Using PictBridge

Setting your digital camera

Make sure your camera is in PictBridge mode. The following PictBridge settings may be available from the LCD of your PictBridge compatible camera. Depending on your camera some of these settings may not be available.

„Copies

„Qualities

„Paper size

„Date print

„File name print

„Layout (1 in 1 printing/Index printing only)

Before using

PictBridge

PictBridge requirements

To avoid errors, remember the following points:

„The machine and the digital camera must be connected using a suitable USB cable.

„The image file must be taken with the digital camera you want to connect to the machine.

Note

The names and availability of each setting depends on the specification of your camera.

You can also set the following PictBridge settings by using the control panel.

Menu selections

Options

Paper Size

Letter, A4, B5, A5, B6, A6

 

 

Orientation

Portrait, Landscape 1

Date & Time

Off, On

 

 

File Name

Off, On

 

 

Print Quality

Normal, Fine

 

 

1If you choose the paper size Letter, A4 or B5, Portrait will be chosen. If you choose A5, B6 or A6, Landscape will be chosen.

94