e Press Stop/Exit.

Note

If an error message is displayed, press Stop/Exit and try again. For more information, see Error and maintenance messages on page 142.

If you print using Windows® printer driver, you need to perform the calibration from the Windows® printer driver. See Advanced tab in the Software User's Guide on the CD-ROM.

If you print using the Macintosh printer driver, you need to perform the calibration using the status monitor. See Status Monitor in the Software User's Guide on the CD-ROM. When the Status Monitor is open, choose Control / Color Calibration from the menu bar.

Auto RegistrationRegistration

If solid areas of colour or images have cyan, magenta or yellow fringes, you can use the auto-registration feature to correct the problem.

a Press Menu, 4, 6, 1.

b To start, press 1. To exit, press 2.

c Press Stop/Exit.

Troubleshooting and routine maintenance

Frequency

You can set the machine to carry out auto registration regularly, and also how often it occurs.

a Press Menu, 4, 6, 2.

b Press a or b to choose Low, Medium,

High or Off.C Press OK.

c Press Stop/Exit.

Manual Registration

If colour still appears incorrectly after auto- registration, you will need to perform manual registration.

a Press Menu, 4, 7, 1.

b Press Mono Start or Colour Start to start printing the colour registration chart.

c When the machine has finished printing the registration sheet,

press 2 (Set Regist.) to correct the colour manually.

d Starting at 1 (Magenta) on the chart, check which coloured bar has the most uniform print density and enter its number into the machine using the

a and b keys. Press OK.

Repeat for 2 (Cyan), 3 (Yellow), 4, 5, 6 to 9.

e Press Stop/Exit.

165