k Plug the machine’s power cord back into the electrical socket first, and reconnect all cables and the telephone line cord.
Turn on the machine.
Note
DO NOT turn off the machine or open the top cover until the LCD returns to the Ready mode.
IMPORTANT
While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
Drum unitsA new drum kit (model no.
When a drum reaches the
Troubleshooting and routine maintenance
Drum End Soon messagesDrums End Soon
If the LCD shows Drums End Soon, it means the drum kit is near the end of its life. Buy a new drum kit
ready before you get a Replace Drums C message. To replace the drum units, see Replacing the drum units on page 174.
IMPORTANT
For best performance, use only Genuine Brother drum units and Genuine Brother toner units. Printing with a
Note
Drum End Soon(X)
If only a specified drum is near the end of its life, the LCD shows the
Drum End Soon(X) message. (X) indicates the drum unit colour that is near the end of its life. ((K) =Black, (Y)=Yellow, (M)=Magenta, (C)=Cyan). Call your Brother dealer to buy a new drum unit
Drum End Soon(X) message will not appear. The message will only refer to a specific drum if a single unit has been replaced previously due to damage or error.
173