d Enter a new number or character. Press OK.

e Press d or c to position the cursor under the character you want to change, and then press Clear/Back to delete it.

Repeat for each character you want to delete.

f Follow the directions beginning in step e in Storing One-Touch dial numbers and Storing Speed-Dial numbers. (See Storing One Touch Dial numbers on page 65 and Storing Speed Dial numbers on page 66.)

Dialling and storing numbers

Setting up Groups forBroadcasting

If you often want to send the same fax message to many fax numbers you can set up a group.

Groups are stored on a One Touch key or a Speed Dial number. Each group uses up a One Touch key or a Speed Dial location. You can then send the fax message to all the numbers stored in a group just by pressing a One Touch key or entering a Speed Dial number, and then pressing Mono Start.

Before you can add numbers to a group, you need to store them as One Touch or Speed Dial numbers. You can have up to 20 small groups, or you can assign up to 207 numbers to one large group.

a Press Menu, 2, 3, 3.

b Choose the One Touch key or Speed

8

Dial location where you want to store the group.

„Press a One Touch key.

„Press (Address Book) and then enter the three-digit Speed Dial location.

Press OK.

Note

Please select a One Touch key or a Speed Dial number that has not been used to store a number.

c Use the dial pad to enter a group number (01 to 20).

Press OK.

69