Fan the pages well.

Chapter 2

Loading documents

Using the automatic document feeder (ADF)

The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 80 gsm paper and always fan the pages before putting them in the ADF.

IMPORTANT

DO NOT leave thick documents on the scanner glass (Flatbed). If you do this, the ADF may jam.

DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped.

DO NOT use cardboard, newspaper or fabric with the ADF. Instead use the scanner glass.

To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Note

To scan documents that are not suitable for the ADF, see Using the scanner glass (Flatbed) on page 23.

„Make sure documents with correction fluid or written with ink are completely dry.

„Documents to be faxed must be from 147.3 to 215.9 mm wide and from

147.3to 356 mm long, and of a standard weight [80 gsm].

22

a Unfold the ADF document output support flap (1) and the ADF support flap (2).

2

1

b

c Place your document face up, top edge first in the ADF until the LCD display message changes and you feel it touch the feed rollers.

d Adjust the paper guides (1) to fit the width of your document.

1