Cleaning the paper pick-up rollers

If you have paper feed problems, clean the pick-up rollers as follows:

a Turn off the machine. Unplug the power cord from the electrical socket.

b Pull the paper tray completely out of the machine.

c Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad (1) of the paper tray with it to remove dust.

1

164

d Wipe the two pick-up rollers (1) inside of the machine to remove dust.

1

e Put the paper tray back in the machine.

f Plug the machine’s power cord back into the electrical socket. Turn on the machine.

Calibration

The output density for each colour may vary depending on the environment the machine is in such as temperature and humidity.

Calibration helps you to improve the colour density.

a Press Menu, 4, 5.

b Press a or b to select Calibrate.

c Press OK.

d Press 1 to select Yes.

e Press Stop/Exit.

You can reset the calibration parameters back to those set at the factory.

a Press Menu, 4, 5.

b Press a or b to Reset. c Press OK.

d Press 1 to select Yes.