
Difficulties | Suggestions |
The machine prints the first couple | Check the settings in your application to make sure that it is set up to work with |
of pages correctly, then some | your machine. |
pages have text missing. | Your computer is not recognising the machine’s input buffer’s full signal. Make |
| |
| sure that you connected the interface cable correctly. (See the Quick Setup |
| Guide.) |
|
|
The headers or footers appear | There is an unprintable area on the top and bottom of the page. Adjust the top and |
when the document displays on the | bottom margins in your document to allow for this. (See Unprintable area |
screen but they do not show up | on page 16.) |
when it is printed. |
|
|
|
The machine is not printing or has | Press Job Cancel. |
stopped printing. | As the machine cancels the job and clears it from the memory it may produce an |
| |
| incomplete printout. |
|
|
Difficulties | Suggestions |
TWAIN errors appear while | Make sure that the Brother TWAIN driver is chosen as the primary source. In |
scanning. | PaperPort™ 11SE, click File, Scan or Get Photo and choose the Brother TWAIN |
| driver. |
|
|
OCR does not work. | Try increasing the scanning resolution. |
|
|
Network scanning does not work. | |
|
|
Cannot scan. | (For |
| Function Lock Settings. |
|
|
Difficulties | Suggestions |
Cannot install software or print. | Run the Repair |
| and reinstall the software. |
|
|
Cannot perform ‘2 in 1’ or ‘4 in 1’ | Check that the paper size setting in the application and in the printer driver are the |
printing. | same. |
|
|
The machine does not print from | Try to reduce the print resolution. (See Advanced tab in the Software User’s Guide |
Adobe® Illustrator®. | on the |
Difficulties | Suggestions |
The machine does not load paper. | If there is no paper, load a new stack of paper into the paper tray. |
The LCD shows No Paper or a | If there is paper in the paper tray, make sure it is straight. If the paper is curled, |
Paper Jam message. | you should straighten it. Sometimes it is helpful to remove the paper, turn the |
| stack over and put it back into the paper tray. |
| Reduce the amount of paper in the paper tray, and then try again. |
| Make sure that manual feed mode is not chosen in the printer driver. |
| Clean the paper |
| |
| If the LCD shows the Paper Jam message and you still have a problem, see |
| |
|
|
130