Press Menu, 1, 7, 2.
Press Menu, 1, 7, 2.
Press Menu, 1, 7, 2.

Chapter 4

Setting Lock

Setting Lock lets you set a password to stop other people from accidentally changing your machine settings.

Make a careful note of your password. If you forget it, you will have to reset the passwords stored in the machine. Please call your administrator or your Brother dealer.

While Setting Lock is On, you cannot change the following settings without a password:

„Date/Time

„Station ID

„Quick Dial settings

„Mode Timer

„Paper Type

„Paper Size

„Volume

„Daylight Save

„Ecology

„LCD Contrast

„Setting Lock

„Secure Function Lock (MFC-9320CW)

„Memory Security (MFC-9120CN)

„Dial Restriction

Setting up the password

a

b Enter a four-digit number for the password using numbers 0–9. Press OK.

c Re-enter your password when the LCD shows Verify:.

Press OK.

d Press Stop/Exit.

34

Changing your Setting Lock password

a

b Press a or b to choose Set Password. Press OK.

c Enter your four-digit password. Press OK.

d Enter a four-digit number for the new password.

Press OK.

e Re-enter your new password when the LCD shows Verify:.

Press OK.

f Press Stop/Exit.

Turning Setting Lock on/off

If you enter the wrong password when following the instructions below, the LCD will show Wrong Password. Re-enter the correct password.

Turning Setting Lock on

a

b Press a or b to choose On. Press OK.

c Enter your four-digit password. Press OK.

d Press Stop/Exit.

Turning Setting Lock off

a Press Menu, 1, 7, 2.

b Enter your four-digit password. Press OK twice.

c Press Stop/Exit.