Brother MFC-9870 Getting Started, Setting the Dialling Mode Tone/Pulse, Setting the Date and Time

4	25
C H A P T E R F O U R
Initial
Setup

Getting Started

Setting the Dialling Mode (Tone/Pulse)

Your MFC is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.

1Press Menu, 1, 1, 1. The screen prompts you to select TONE or

PULSE.

DIALLING:TONE

SELECT { } & SET

DIALLING:PULSE

SELECT { } & SET

2Use or to select the dialling mode.

3Press Set when the screen displays the dialling mode you want.

4Press Stop to exit.

Setting the Date and Time

Your MFC displays the date and time, and prints it on every fax you send.

In the event of a power failure, the MFC maintains date and time information for several hours. All other settings remain unaffected.

1Press Menu, 1, 1, 2. The screen prompts you to enter the year.

YEAR:XX ENTER & SET