Brother MFC-9870 manual Automatic Transmission, Dual Access, Real Time Transmission, Real Time TX

S E T U P S E N D 39

Automatic Transmission

This is the easiest way to send a fax.

1Insert the document in the feeder or on the glass platten.

2Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.

3Press Start.

Dual Access

If the document feeder is empty, you can place a document in the feeder, set temporary settings, dial a number, and begin scanning the fax into memory, even when the MFC is receiving a fax, sending a fax, or printing a fax from memory. The screen displays the new job number and how much memory is available.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel a scan. If you get a MEMORY FULL message while scanning in a subsequent page, you'll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

The number of documents you can scan into memory varies with the data they contain.

Real Time Transmission

When you have a MEMORY FULL message, the MFC cannot continue scanning documents into memory before sending. However, you can turn on REAL TIME TX.

1Insert the document in the feeder or on the glass platten.

2Press Menu, 1, 3, 8.

8.REAL TIME TX

3To change the default setting, press or to select ON (or OFF)

and go to Step 6. ––OR–– For the next fax transmission only, press or to select NEXT FAX ONLY.

REAL TIME TX:ON

SELECT { } & SET

4Press Set.

5For the next fax only, press or to select ON (or OFF).

6Press Set.