Brother MFC-9870 IfYou Get a Memory Full Message, Memory Full P.01 Copy to Copy Stop to Abort

M A K I N G C O P I E S 79

2Using the document guide on the left, center the document face down on the glass platten.

3Press Copy.

4As needed, use the Copy keys to change the Contrast,

Document Type, and Enlarge/Reduce settings.

5Using the dial pad, enter the number of copies you want (up to 99).

6 Wait five seconds— OR—Press Copy again.

IfYou Get a Memory Full Message

If the memory becomes full while you are scanning a document to be copied the screen displays

MEMORY FULL P.01

COPY TO COPY

STOP TO ABORT

If you were scanning the first page to be copied, press Stop to cancel the operation and restart to make a single copy. If you were scanning a subsequent page, you’ll have the option to press Copy to copy the pages scanned so far ––OR— press Stop to cancel.

You’ll need to clear some fax message to make some additional memory available before you can continue.

To gain extra memory, you can turn off Fax Storage (see chapter 8)— OR—Print fax message in memory (see chapter 6).