Loading Paper
You can stack paper in the
Refer also to page
n Certain environmental conditions, such as extreme temperatures or humidity, can cause some print media to feed incorrectly in the multi- purpose tray. If you have trouble with print media becoming skewed or multiple sheets being fed, do not load a stack of the media in the multi- purpose tray, but feed one sheet at a time.
Guidelines
When automatically feeding a stack of paper in the
❏Do not leave paper stacked in the
❏If your printed page contains a large amount of graphics, the ink on the page may be damp due to the print density. Leave the page in the output tray for 30 to 60 seconds to allow the ink to dry. Then remove the page being careful not to touch the document tray or extension. Should you dirty the document tray or extension when removing the page, wipe them clean with a clean, soft,
❏The capacity of the paper output tray is 50 sheets of paper. To reduce paper jams, remove paper from the output tray before the count reaches 50.
❏If paper curls after printing, remove it immediately; otherwise paper jams may occur.
❏The platen (a roller inside the unit) may become inked if you print
data beyond the width of the page. If this happens, clean the platen with a soft cloth. (1 p.
Paper Handling
Chapter 5 | Paper Handling |