What Happens When Fax/Tel Mode is Selected
Type of call | Telephone |
| Fax |
| Fax |
|
|
| Sending document |
| Sending document |
|
|
| manually |
| automatically |
Telephone charges begin for the caller.
The MultiPASS C70 answers without ringing.*
RING START TIME (Factory default setting = 8 sec.)
F/T RING TIME (Factory default setting = 22 sec.)
The MultiPASS C70 listens for the fax tone.
(For 8 sec.)
The fax tone is detected.
The fax tone is not detected.
The MultiPASS C70 starts ringing.
If you don’t pick up the handset
(within 22 sec.).
The document is
received automatically.
(The fax tone is detected and the MultiPASS C70 switches to receive mode.)
Pick up the handset to talk.
Receiving Faxes
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT.
RECEIVE
(Factory default setting)
DISCONNECT
The MultiPASS C70 disconnects the call.
Not all fax machines are capable of sending a fax tone. For those cases if you set the DEFAULT ACTION to RECEIVE, the MultiPASS C70 switches to receive mode automatically and starts receiving the document. If no document comes in, it disconnects after approximately 55 seconds.
| You can select these options in the RX MODE submenu of the RX |
| SETTINGS menu when FAX/TEL AUTO SW is selected. See the |
| following page for details on changing the settings: |
n |
|
You can also set these options from the MultiPASS Desktop Manager. | |
(1 MultiPASS Suite Software User’s Guide) | |
|
|
*Australia only: After answering, the MultiPASS C70 plays “You are connected. Please hold.”
Chapter 8 | Receiving Faxes |