Transporting the MultiPASS C70

Whenever you plan to transport the MultiPASS C70, you need to prepare it so it will not be damaged during the move.

1.DO NOT remove the BJ cartridge from the unit.

2.Make sure the cartridge holder is in its home position on the right side of the unit.

If it is not in its home position, press the C button (inside the unit).

3.With the cartridge holder on the right side of the unit, tape the BJ cartridge and cartridge holder to the side of the unit.

4.Disconnect the power cord.

5.Disconnect the handset or telephone. Disconnect the extension phone, answering machine, or modem (if using them). Then disconnect the telephone line and the parallel cable to the PC.

6.Remove the document tray. Then, remove the extension from the document tray. (1 p. 2-13)

7.Remove the document support. (1 p. 2-12)

8.Remove the handset, handset cradle, and cradle support from the MultiPASS C70. (1 Appendix B, Handset)

9.Replace all tapes and shipping materials you removed when you first unpacked the MultiPASS C70. (1 p. 2-9)

10.Pack the MultiPASS C70 and all its components into its original shipping carton. Use the illustration on page 2-6 for reference.

12-32Maintenance

Chapter 12