❏Make sure the total amperage used by all devices plugged into the wall outlet does not exceed the ampere rating of the outlet’s circuit breaker.
❏Do not allow anything to rest on the power cord, and do not locate the unit where the cord will be walked on. Make sure the cord is not knotted or kinked.
❏If you use an extension cord with the MultiPASS C70, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord ampere rating. Also make sure that the total ampere rating of all products plugged into the wall outlet does not exceed the current amperage of the circuit breaker.
❏Do not push objects of any kind into the slots or openings on the cabinet as they may touch dangerous voltage points or short out parts. This could result in fire or electric shock.
❏Do not allow small objects (such as pins, paper clips, or staples) to fall into the MultiPASS C70. If something does fall into it, unplug the unit immediately and contact your local authorised Canon dealer or the Canon help line.
❏To avoid spillage in or around the unit, do not eat or drink near the unit. If you spill liquid or if any substance falls into the unit, immediately unplug the unit and contact your local authorised Canon dealer or the Canon help line.
❏Always unplug the MultiPASS C70 before moving or cleaning it.
❏Whenever you unplug the MultiPASS C70, wait at least five seconds before you plug it in again.
❏During electrical storms, disconnect the power cord from the power outlet. (Please note that any documents stored in the unit’s memory will be deleted when you unplug the unit.)
Introducing the MultiPASS C70
Chapter 1 | Introducing the MultiPASS C70 |