| Before unpacking your MultiPASS C70, follow these guidelines to |
| choose the best location for it: |
c |
|
Please review the information provided in Important Safety Instructions | |
(2 p. | |
| use. |
|
|
| ❏ Put the MultiPASS C70 in a cool, dry, clean, well ventilated place: |
| • Make sure the area is free from dust. |
| • Make sure the location is not affected by extreme temperature |
| changes, and always stays between 10° and 32.5°C. |
| • Make sure the area’s relative humidity is always between 20% |
| and 85%. |
| ❏ Keep the MultiPASS C70 away from direct sunlight. If you have to |
| place the unit near a window, install heavy curtains or blinds to |
| protect the unit from sunlight. |
| ❏ If possible, put the MultiPASS C70 near an existing telephone outlet, |
| to avoid the expense of installing a new one. |
| ❏ Place the unit near a standard |
| ❏ Place the MultiPASS C70 near the PC you will be connecting it to. |
| Make sure you can reach it easily, as you will be using it as a fax |
| machine, copier, telephone, printer, and scanner. |
| ❏ Do not use or store the unit outdoors. |
| ❏ To avoid damage to the unit from overheating, do not block the |
| exhaust vent. Install the unit approximately 10 cm away from walls |
| or other equipment. |
| ❏ Do not plug the MultiPASS C70 into the same circuit as an appliance |
| such as an air conditioner, electric typewriter, television, or copier. |
| Such devices generate electrical noise that can interfere with your |
| MultiPASS C70’s ability to send and receive faxes. |
| ❏ Set the MultiPASS C70 on a flat, stable, |
| strong enough to support its weight (approx. 5.4 kg). |
| ❏ Do not install the MultiPASS C70 near devices that contain magnets |
| or generate magnetic fields, such as speakers. |
Setting Up Your MultiPASS C70
Chapter 2 | Setting Up Your MultiPASS C70 |