Making Connections

Connecting the MultiPASS C70 to Your PC

Your MultiPASS C70 has an 8-bit, bi-directional parallel interface port that allows you to connect it to your PC. You can purchase a Centronics®-compatible parallel cable with bi-directional capability from your Canon dealer or any computer store. Make sure the cable is IEEE 1284-compliant.

n For best results, use a cable that is no longer than 2 metres.

Connect the MultiPASS C70 to your PC as follows:

1.Make sure your PC is turned off and the MultiPASS C70 is unplugged.

2.Align the cable connector with the parallel interface port so their shapes match.

3.Gently press the cable connector into the port.

4.Secure the cable connector by snapping both wire clips (on the sides of the port) into the cable connector.

Setting Up Your MultiPASS C70

Chapter 2

Setting Up Your MultiPASS C70

2-15