Connect the power cord as follows:
1.Plug the supplied power cord into the power cord connector on the back of the MultiPASS C70.
MultiPASS C70
Setting Up Your
2.Plug the other end of the power cord into a properly grounded AC outlet
n The MultiPASS C70 has no power switch, so its power is on as long as it is plugged in. Once connected, though, the unit still needs to warm up before you can use it.
❏While the MultiPASS C70 is warming up, the Alarm light blinks and the following message appears in the LCD display:
PLEASE WAIT
❏When the time and receive mode appear, the MultiPASS C70 is in standby mode and ready for use.
Ex:
13:30 FaxOnly
Chapter 2 | Setting Up Your MultiPASS C70 |