Connecting the Power Cord

c

Follow these guidelines when connecting your MultiPASS C70 to a

power source:

 

❏ The MultiPASS C70 is intended for domestic use only and requires

 

200–240 V AC. Do not use it outside the country for which it is

 

intended.

 

❏ Only plug the unit into a 200–240-volt AC 50–60 Hz, three-prong

 

grounded outlet.

 

❏ Use only the power cord that came with the unit. Using a longer

 

cord or extension cord can cause the unit to malfunction.

 

❏ Unplug the unit only by pulling on the plug itself. Never pull on

 

the cord.

 

❏ The MultiPASS C70 is equipped with a three-prong, grounding-

 

type plug provided with a third (grounding) pin. This plug will

 

only fit into a grounding-type outlet. This is a safety feature. If you

 

are unable to insert the plug into your outlet, contact an electrician

 

to replace your outlet. Do not defeat the safety purpose of the

 

grounding-type plug by breaking off the third prong or using a 3-

 

to-2 adaptor.*

 

❏ Do not plug the MultiPASS C70 into the same circuit as an

 

appliance such as an air conditioner, electric typewriter, television,

 

or copier. Such devices generate electrical noise that can interfere

 

with your MultiPASS C70’s ability to send and receive faxes.

 

❏ Do not allow anything to rest on the power cord, and do not locate

 

the unit where the cord will be walked on. Make sure the cord is

 

not knotted or kinked.

 

❏ Make sure that the total ampere rating of all products plugged into

 

the wall outlet does not exceed the current amperage of the circuit

 

breaker.

 

❏ Make sure the operation panel of the MultiPASS C70 is properly

 

closed, and that there are no documents in this area.

 

 

 

* The shape of the plug varies depending on the country of purchase.

2-20

Setting Up Your MultiPASS C70

Chapter 2