Start / Scan
n
❏If no fax number is assigned to the coded speed dialling code you enter, the LCD displays NO TEL #. If this happens, make sure you entered the correct code and that the number you want to dial is registered under that code.
4.Press Start/Scan to begin scanning for sending, or wait a few
seconds for the MultiPASS C70 to begin scanning automatically.
❏If you prefer the MultiPASS C70 never to scan a document
automatically after a few seconds, you can turn this feature off. (1 TIME OUT, pp.
❏You will see a series of brief messages showing details on the transmission.
You can also use coded speed dialling to send a document to more than one destination at a time. (1 Sequential Broadcasting, p.
Speed Dialling | Chapter 6 |