Using the MultiPASS C70 With the MultiPASS Desktop Manager for Windows®

Canon’s MultiPASS Desktop Manager for Windows® allows you to use the MultiPASS C70’s faxing, telephone, printing, and scanning functions directly from your PC.

For more details on using your MultiPASS C70 with the MultiPASS Desktop Manager, refer to the MultiPASS Suite Software User’s Guide.

n The MultiPASS Desktop Manager is designed to operate with Windows® 95, 98, and NT 4.0.

Hardware and Software Requirements

Before you start, make sure you have the following PC setup. These are the minimum requirements.

❏IBM® or compatible computer with a Pentium 90 processor or higher. An Intel Pentium processor is recommended.

❏Microsoft Windows® 95, 98, or NT 4.0

❏For Microsoft Windows® NT 4.0, Service Pack 3 or later

❏32 megabytes (MB) of RAM. 64 MB of RAM is recommended.

❏60 megabytes (MB) of available hard disk space. 150 MB of available hard disk space is recommended.

❏CD-ROM drive, or access to one over a network connection

❏256-colour SVGA monitor or greater

❏Bi-directional shielded IEEE 1284-compatible parallel cable 2 metres in length or shorter. For assistance on purchasing the correct cable, contact your local authorised Canon dealer.

1-10

Introducing the MultiPASS C70

Chapter 1