1.Prepare the document and load it, face down, in the Automatic Document Feeder (ADF). (1 pp. 4-6, 4-11)

The LCD display shows the following:

Currently used memory:

Standby to scan:

MEMORY USED 0%

DOCUMENT READY

If you are sending in colour to a fax machine with colour capability, press Color/B&W to turn on its light. (1 p. 7-3)

If necessary, you can adjust the resolution and contrast. (1 pp. 7-4, 7-6)

You may not be able to use memory sending if the percentage shown in the MEMORY USED display is close to 100%. In this case, use manual sending via the handset to send your document.

2.Dial the other party’s fax number.

Use one of the dialling methods described earlier in this chapter. (1 p. 7-8)

Ex:

TEL= 9p7654321

If you enter the wrong number, press Stop, then enter the correct number.

If you must first dial a digit to get an outside line (“9”, for

example), add a pause after that digit by pressing R (Redial)/Pause, as shown in the example above.

7-10

Sending Faxes

Chapter 7