zUsing the ADF

Note

zSet a document on the Platen Glass if you want to scan it at optimum quality.

zThe area (range) within 0.08” / 2 mm from the top edge of document cannot be printed since the machine cannot scan it.

zDo not load the following types of documents in the ADF. They will jam.

–Wrinkled or creased paper

–Curled paper

–Torn paper

–Paper with holes

–Carbon paper or carbon-backed paper

–Surface treated paper

–Onion skin or thin paper

–Photograph or thick paper

1 Remove any documents from the Platen Glass.

2 Open the Document Tray.

3 Load the document in the ADF (1).

Load the document with the side you want to copy, fax, or scan face up in the ADF.

(2)

(1)

(A)

4 Adjust the Document Guides to match the document width (2).

Chapter 1

Before Printing

21