2 Use the numeric buttons to enter the two-digit code (00-39) assigned to the number you want to dial, then press [OK].

„Redialing a Busy Number

There are two methods of redialing: Manual redialing and Automatic redialing.

zManual Redialing

To redial the fax number last dialed with the numeric button, press [Redial/Pause].

Note

zFor details on memory sending, see “Sending from Your Machine (Memory Sending)” on page 73.

zTo cancel manual redialing, press [Stop/Reset].

zAutomatic Redialing

When using memory sending to send a document and the recipient’s line is busy, your machine will redial the number after a specified interval.

Note

zYour machine enables you to customize automatic redialing settings to suit your needs.

zTo cancel automatic redialing, wait until the machine starts redialing, then press [Stop/ Reset]. Follow the instructions on the LCD.

zYou can also delete the document from memory. For details, see “Printing or Deleting a Document in Memory” on page 77.

Customizing Automatic Redialing Settings

You can customize the following settings:

zYou can specify whether or not your machine redials automatically by setting <AUTO REDIAL> under <TX SETTINGS> to <ON> or <OFF>.

zYou can specify the number of times the machine redials by setting <REDIAL TIMES> after <AUTO REDIAL> is set to <ON>.

zYou can specify the time interval between redialings by setting <REDIAL INTERVAL> after <REDIAL TIMES> is specified.

Note

For details on the redialing settings, see “TX SETTINGS” on page 94.

„Documents Stored in Memory

Caution

If you disconnect the power cord, all the documents stored in memory are deleted. Send or print all the documents stored in memory you do not wish to lose before disconnecting the power cord.

zPrinting the MEMORY LIST

The machine can print a list of documents stored in memory (MEMORY LIST) showing the transaction number (TX/RX NO.), transaction mode, recipient name, number of pages, date, and transmission time of each document. This will help you select a document in memory you wish to delete or print.

1 Press [FAX], then press [Menu].

76

Faxing

Chapter 4