Canon MP530 Changing the Machine Settings, SMALL, „QUIET MODE, PRINT SETTINGS, EXTENDED AMOUNT, WEXTENDED AMOUNT, „PREVENT ABRASION, PRINT SETTINGSQUIET MODE

Chapter 7

Changing the Machine Settings

Changing the Settings

This section describes the procedure to change the settings on <DEVICE SETTINGS>, taking the steps to specify <EXTENDED AMOUNT> as an example.

1 Press [ON/OFF] to turn on the machine.

See “Turning on the Machine” on page 18.

2

3

Press [Menu] repeatedly to select <DEVICE SETTINGS>.

Select the menu.

(1)Use [ ] or [ ] to select the setting item, then press [OK]. Example: select <PRINT SETTINGS>.

The setting screen for the selected item is displayed.

PRINT SETTINGS QUIET MODE

X

(2)Use [ ] or [ ] to select the menu, then press [OK]. Example: select <EXTENDED AMOUNT>.

PRINT SETTINGSWEXTENDED AMOUNT X

4 Change the settings.

(1)Use [ ] or [ ] to select the setting item, then press [OK]. Example: select <SMALL>.

EXTENDED AMOUNT

SMALL

X

PRINT SETTINGS

„QUIET MODE

Use this function if you want to reduce the operation noise, such as when printing at night.

Important

zThe printing speed may be reduced compared to when this setting is set to <OFF>.

zThis function may not be so effective depending on the print quality setting.

zFurthermore, certain noise, such as when the machine is preparing for printing, is not reduced.

„PREVENT ABRASION

Use this setting only if the print surface becomes smudged.

Chapter 7 Changing the Machine Settings 91