Canon MP530 100%, JUST, ZOOM 25-400%, WFIT-TO-PAGEX, ENLARGE/REDUCE, „Adjusting Exposure (Intensity), zUsing Automatic Copy Ratios (Fit To Page)

2

3

Use [] or [] to select <ZOOM>, then press [OK].

ZOOM25-400%		+
-	100%

Use [] or [] to select a copy ratio by the percent between 25% and 400%.

zPressing [] decreases the copy ratio and pressing [] increases the ratio.

zPress and hold down [] or [] to quickly advance through the ratios.

Note

The ratio can be also input by using the numeric buttons.

4 Press [OK].

zUsing Automatic Copy Ratios (Fit To Page)

You can set the machine to automatically reduce or enlarge the document to fit the page size you selected in <SIZE>.

1

2

Press [Enlarge/Reduce].

Use [] or [] to select <FIT-TO-PAGE>.

ENLARGE/REDUCEWFIT-TO-PAGE X

Note

When <FIT-TO-PAGE> is selected, the document loaded in the ADF cannot be scanned.

3 Press [OK].

The message <AUTO> appears on the LCD.

Note

If the document is not properly reduced or enlarged to fit the page size, use preset or custom copy ratios and try copying again.

„Adjusting Exposure (Intensity)

Exposure (intensity) is the degree of difference between light and dark. Increasing the exposure setting further blackens dark areas and whitens bright areas. Conversely, decreasing the exposure setting reduces the difference between bright and dark areas. You can adjust the exposure between five gradations.

1

2

3

Press [Exposure].

	INTENSITY
W	MANU	AL	AD	JUST	X

Use [] or [] to select the <MANUAL ADJUST> or <AUTO ADJUST (A)>.

Press [OK].

42 Copying Chapter 2