Canon MP530 -LT DK+, SCAN CONTRAST, „Sending Methods, zAdjusting the Scan Contrast, z Sending from Your Machine (Memory Sending)

2 Use [ ] or [	] to select the resolution.
STANDARD:	Suitable for text-only documents.
FINE:	Suitable for fine-print documents.
PHOTO:	Suitable for photographs.

Note

When sending color faxes, selecting <FINE> has the same effect as selecting <PHOTO>.

3 Press [OK].

zAdjusting the Scan Contrast

Contrast is the degree of difference between light and dark. Increasing the contrast setting further blackens dark areas and whitens bright areas. Whereas decreasing the contrast setting reduces the difference between bright and dark areas. You can adjust the contrast between three gradations.

1

2

Press [FAX], then press [Exposure].

SCAN CONTRAST-LT DK+

Use [] or [] to select the contrast.

Pressing [] decreases the density, and pressing [] increases the density.

3 Press [OK].

„Sending Methods

There are three methods of sending faxes:

zMemory sending

zManual sending

zSending from your computer

This section explains how to use these methods.

z Sending from Your Machine (Memory Sending)

1 Load the document on the Platen Glass or in the ADF.

Important

When sending a double-sided document, set the document on the Platen Glass. You cannot scan double-sided document from the ADF.

Note

For details on document requirements and how to load documents, see “Loading Documents” on page 19.

2

3

Press [FAX].

Adjust the settings for your document as necessary.

Chapter 4 Faxing 73