Enables/disables the summer time setting. If you select <ON>, you can select additional
START DATE/TIME: | Sets the date and time that summer time starts. | |
| SET MONTH | Specify the month. |
| SET WEEK | Specify the week. |
| SET DAY OF WEEK | Specify the day of the week. |
| SET SHIFT TIME | Specify the 24 hours. |
END DATE/TIME: | Sets the date and time that summer time ends. | |
| SET MONTH | Specify the month. |
| SET WEEK | Specify the week. |
| SET DAY OF WEEK | Specify the day of the week. |
| SET SHIFT TIME | Specify the 24 hours. |
Enters the fax/telephone number printed on faxes you send.
zUNIT NAMEEnters the name printed on faxes you send.
zTX TERMINAL IDPrints sender information at the top of each fax you send (The ON/OFF setting may be available depending on the county of purchase).
TTI POSITION: | Selects the position of the sender information (outside or inside |
| the image area) when sending black & white faxes |
| (Automatically set inside the image area for color faxes). |
FAX/TEL NO. MARK: | Selects the mark to appear before the fax/telephone number |
| printed on faxes you send. |
Enables/disables the alarm that alerts you if the handset of the telephone connected to the machine is not hung up properly.
zVOLUME CONTROLSets the RX RING VOLUME and LINE MONITOR VOL.
RX RING VOLUME: | When the machine is set to ring, selects the ring volume. |
LINE MONITOR VOL.: | Selects the line monitor volume while dialing. |
Selects the ring type for incoming call.
zTEL LINE TYPESelects the telephone line type setting for your machine.
Note
In New Zealand, select <TOUCH TONE>. You cannot use <ROTARY PULSE>.
zACTIVITY REPORT
Sets whether to print the ACTIVITY REPORT automatically after every 20 transactions.
TX SETTINGSzECM TX94 | Changing the Machine Settings | Chapter 7 |