If you load plain paper in the Cassette and photo paper in the Auto Sheet Feeder, changing the paper source allows you to print on both types of paper without removing and reloading paper. To change the paper source, use [Feed Switch] on the machine or printer driver.
You can also specify the type/size of paper to be fed from the Cassette for regular use with the printer driver. For example, you can specify that
Note
zFor information on page size, media type, and paper support load limit for Auto Sheet Feeder or Cassette, see “Recommended Paper and Requirements” on page 22.
zFor information on the printer driver settings, refer to the Printer Driver Guide.
(A)
(B)
(C)
(A)Auto Sheet Feeder
(B)You can switch between paper loaded in the Auto Sheet Feeder (e.g., 4" x 6" / 101.6 x 152.4 mm) or Cassette (e.g.,
(C)Cassette
zContinuous Printing on the Same Type/Size of Paper by Using Both the Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches to the other one. This is useful for printing onto a large volume of paper.
Important
zWhen printing from a computer, you need to set this feature with the printer driver. For details, refer to the Printer Driver Guide.
zThis feature can be used only when paper of the same size and media type are loaded in the Cassette and Auto Sheet Feeder.
zWhen printing from a computer, this feature can be used only when both paper sources are loaded with paper other than Credit Card- or
zIn Copy mode, this feature can be used only when both paper sources are loaded with paper other than Credit Card- or
zIn Fax mode, this feature can be used only when both paper sources are loaded with A4- or
zThis feature cannot be used for the Sticker copy.
Chapter 1 | Before Printing | 25 |