Power supply

Never remove the plug by pulling on the cord.

 

Pulling on the power cord may damage the cord and cause a fire or electrical shock.

 

 

 

When turning OFF the power, be sure to press [ON/OFF] and unplug the machine.

 

However, if the machine is unplugged during printing, the Print Head is not protected with

 

the cap that prevents the ink from drying. This may affect the print quality of the machine

 

when printing later.

 

 

 

During electrical storms, turn OFF the power and disconnect the power cord from the

 

power outlet.

 

 

 

Do not use an extension cord as this may result in fire or electrical shock.

 

 

 

Ensure that the area around the power outlet is kept clear at all times so you can easily

 

unplug the power cord if necessary. Otherwise you will be unable to disconnect the power

 

plug in case of an emergency, and it may result in fire or electrical shock.

 

 

 

Never use a power supply source other than the one rated for the machine in the country

 

where you purchased the machine as it may result in fire or electrical shock.

 

The operating requirement of this machine is as follows:

 

110-240 V AC, 50/60 Hz (depending on local electrical requirements)

 

 

 

Do not plug the machine into the same circuit as appliances such as an air conditioner,

 

television, or copier. These devices generate electrical noise which may interfere with your

 

machine’s operation.

 

 

 

Whenever you turn OFF the power and unplug the machine, wait at least one minute before

 

you plug it in again.

 

 

 

Use only the power cord that came with the machine. Using a different power cord may

 

cause electric leakage or damage to the machine.

Turn OFF the power and unplug the machine in the following conditions:

zWhen the power cord or plug is damaged or frayed.

zIf liquid has spilled into the machine.

zIf the machine has been exposed to rain or water.

zIf the machine does not operate normally when you have followed the instructions in the guides included with your machine.

zIf the machine does not operate normally when you have followed the instructions provided in “Troubleshooting” on page 111.

zIf the machine has been dropped or damaged.

zIf the machine exhibits a distinct change in performance, indicating a need for servicing.

Turn OFF the power and disconnect the power cord if the machine will not be used for a long period such as during holidays.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

7