Procedure:
1 Display the Special copy screen.
See “Special Copy” on page 45.
2 Load the document on the Platen Glass or in the ADF.
3 Use [] or [] to select <IMAGE REPEAT>, then press [OK]. 4 Use [] or [] to select <AUTO> or <MANUAL>.
If you selected <AUTO> and pressed [OK], go to step 8.
If you selected <MANUAL> and pressed [OK], go to step 5.
Note
When <AUTO> is selected, the document loaded in the ADF cannot be scanned.
5 Use [] or [] to set the vertical repeats (1 to 4).
| VERTICAL |
| < 2 | > | |
|
| HORIZONTAL | 2 |
|
6 Press [OK].
7 Use [] or [] to set the horizontal repeats (1 to 4).
| VERTICAL |
| 2 |
| ||
|
| HORIZONTAL | < | 2 | > |
8 Press [OK].
9 Specify the page size and media type.
See “Changing the Page Size and Media Type” on page 37.
Note
10 Specify the necessary items.
See “Changing the Copy Settings” on page 41.
Note
50 | Copying | Chapter 2 |