“Paper size” setting

“Paper type” setting

Paper loaded in machine

A4 / 8.5" x 11" (Letter)*3, *4

Photo

Photo Paper Plus Glossy

 

 

 

 

 

Photo Paper Plus Semi-gloss

 

 

 

 

 

Glossy Photo Paper

 

 

 

 

Fast Photo

Photo Paper Pro

 

 

 

A4*3, *4

Photo

Glossy Photo Paper "Everyday

 

 

Use"

 

 

 

5.4 x 8.6 cm / Credit Card

Photo

Glossy Photo Paper

 

 

 

*1 This paper is exclusively used to print photo stickers. When printing on sticker paper, select 4" x 6" / 10 x 15 cm in “Paper size”.

*2 This size can be selected only for Canon PictBridge compatible devices (note that it cannot be selected for some models).

*3 “Plain Paper” can be selected for “Paper type” when A4 or 8.5" x 11" (Letter) is selected for “Paper size”. When “Plain Paper” is selected for “Paper type”, bordered printing will be performed even when “Borderless” is selected for “Layout”.

*4 When A4 or 8.5" x 11" (Letter) is selected for "Paper size", you can print in 4-up layout.

„About “Layout” and “Trimming”

For "Layout", when the “Default” (selections based on the machine setting) is selected, the machine operates based on the <PICTBRIDGE SET> in [Menu] of the machine. Trimming is performed based on settings on the PictBridge compliant device.

Note

zWhen printing onto Photo Stickers (PS-101) (16-up), use the following settings.

1.Select the Auto Sheet Feeder as the paper source.

For details, see “Loading the Print Media in the Auto Sheet Feeder” on page 27. Always load Photo Stickers (PS-101) in the Auto Sheet Feeder.

2.Select 4" x 6" / 10 x 15 cm for the “Paper size”, and “Photo” for the “Paper type”.

3.Select N-up for layout, then select 16-up.

zSome PictBridge compliant devices display the Layout option; 2-up, 4-up, 9-up, and 16-up. In this case always select 16-up. If there are no options on the PictBridge compliant device that correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not possible.

zWhen you using Photo Stickers (PS-101), do not set “Borderless” in “Layout” settings.

„About “Image optimize”

When the “Default” (selection based on the machine setting) is selected, the machine operates based on <PICTBRIDGE SET> in [Menu] of this machine.

If you use a Canon PictBridge compatible device, you can select “VIVID”, “NR”, “VIVID+NR” or “Face” (Note that these options cannot be selected for some models).

Note

zWhen “VIVID” is selected, green and blue portions of photos are printed vividly.

zWhen “NR” (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed.

zWhen “VIVID+NR” is selected, functions of both “VIVID” and “NR” are performed.

zWhen “Face” is selected, backlit images are corrected when printed.

Chapter 3

Printing Photographs Directly from a Compliant Device

57