Carrier Access SNMP manual Rack Mounting on a 19 Rack Using Heavy-Duty Brackets

1.Remove the small brackets from the unit.

2.Fasten heavy-duty brackets to unit as shown.

19" Heavy-duty mounting brackets CAC PN 004-0041

3.Mount the unit on the standard rack using four 10-32 x 3/4" machine screws.

4.Adjust the offset by sliding the screws in the bracket slots, then tighten the screws.

NOTE: To mount units in standard EIA 23" racks, use heavy-duty bracket CAC PN 004-0113.

Figure 4-3: Rack Mounting on a 19” Rack Using Heavy-Duty Brackets

4-8 9/24/01