Carrier Access SNMP manual Code ipaddr path .Load app code path from Tftp server

Command Line Interface (CLI)

t11	Set Clock Source to T1 #1
t12	Set Clock Source to T1 #2
internal	Set Clock Source to internal
config	Set/Restore Configuration
code ipaddr “path” .Load app code “path” from TFTP server;
	Specify the ipaddr and the path including
	filename; System will reboot new code
download	(Diagnostic) Download current configura-
	tion
factory	Initialize and Download Factory Defaults
from [ipaddr “path”]Load configuration FROM XModem or TFTP
	server;XModemisreliablefor19200baud
	orless;FortheTFTPserver,specifythe
	ipaddr and the path including filename
restore	Restore/download last saved configuration
save	Save current configuration
to	Send configuration TO XModem server
	XModem is reliable for 19200 baud or less
connections	Display Connections
clear	Display Clear Channel Connections
dynamic	Display Dynamic Connections
voice	Display Voice Channel Connections
craft	Display/Set Craft Port
baud	Set Baud Rate
b1200	1200 baud
b2400	2400 baud
b4800	4800 baud
b9600	9600 baud
b19200	19200 baud
b38400	38400 baud
b57600	57600 baud
data	Set Data Size
bit7	7 bit data
bit8	8 bit data
dial “string”	Set Modem Dialout String
hangup “string” ....Set Modem Hang Up String
init “string”	Set Modem Initialization String
parity	Set Parity
even	Even Parity
none	No Parity
odd	Odd Parity
stop	Set Stop Bits
bit1	One Stop Bit
bit2	Two Stop Bits
date	Display/Set Date: date mm/dd/yyyy
dni	Display/Set DNI (DS1 to DS1) properties
signal	Display DNI Signal Type
s:c [n] opt	Set Signal Type for [n] channels from s:c

9/24/01 14-11