Carrier Access SNMP manual Configuration Commands, 14.4.4.1 aco

		p2to15		-	O.151
		p2to20		-	QRSS w/o bit stuffing
		p2to23		-	O.151
		qrss		-	QRSS pattern (default)
		zeros		-	all zeros
	r	- optional error rate
		0		-	disable errors (default)
		r=1-7		-	error rate of 10^-r
QRSS to net ...... v35 v1 send				network
	>	v35 v1 send			network qrss
equipment ........ Send Pattern to Equipment
[p] [r] ........ p		- optional pattern
		alt		-	alternating 1/0
		d4up		-	D4 loopup: 00001
		d4dn		-	D4 loopdown: 001
		ones		-	all ones
		p1in8		-	00000001
		p511		-	O.153
		p2047		-	O.152
		p2to15		-	O.151
		p2to20		-	QRSS w/o bit stuffing
		p2to23		-	O.151
		qrss		-	QRSS pattern (default)
		zeros		-	all zeros
	r	- optional error rate
		0		-	disable errors (default)
		r=1-7		-	error rate of 10^-r
p511 to router	.. >	v35 v1 send			equipment p511
speed	Single Channel Speed
nx56	56Kb per Channel with 7 Bit Data
nx64	64Kb per Channel with 8 Bit Data
dsu	DSU V.54 Remote Loopback Protocol
off	Do not respond to in-band V.54 signals
on	Respond to V.54 in-band signals (default)
verbose	Display/Set			Command Fill Verbose Mode
off	Disable		command fill suggestions
on	Enable		command fill suggestions (def)
version	Display Version Numbers in System

14.4.4 Configuration Commands

14.4.4.1 aco

Use the aco command to display, or turn on and off, the Alarm Cutoff feature.

14-18 9/24/01