Carrier Access SNMP manual 14.4.4.23 rs232, Screen height, Snmp, Telnet, Time

Operations	Type	Comments
To validate that a node	ping 192.127.20.10	Sends one Ping to the indicated ipaddr
on the network can be
reach via the Access
Bank II - SNMP
To send IP ping 4 times	ping 192.127.20.10 4 50	Sends 4 Pings to the indicated ipaddr
with 50 ml delay		with 50 ms delay between pings
between pings
To display Help	ping?

14.4.4.23 rs232

Use the rs232 command to configure the RS232 port. To see all the options for this command, type rs232 help.

14.4.4.24 screen height

Use the screen height command to set or display the current display parameters.

Operations	Type	Comments
To display current screen	screen height
parameters

14.4.4.25 snmp

Use the snmp command to configure the SNMP system group settings. To see all the options for this command, type snmp help.

14.4.4.26 telnet

Use the telnet command to configure the echo for the telnet sesson. The echo can be turned on and off.

14.4.4.27 time

Use the time command to set time in the format shown: The time is used to accurately time stamp

14-26 9/24/01