Carrier Access SNMP manual 14.4.4.5 clk, Config, Connections

There are no options for this command. To initiate a reboot, type boot and press return.

14.4.4.5 clk

Use the clk command to set the system clock sources. The Access Bank II - SNMP allows the user to configure a primary and secondary clock source.

Operations	Type	Comments
To set primary clock	clk primary T1 1	This sets the primary system to clock
source to T1 #1		to be derived from T1 #1. For Access
		Bank II - SNMP applications, this
		should be the T1 that is being received
		from the Long Distance carrier.
To set secondary clock	clk secondary T1 2
source to T1 #2
To display Help	clk ?

14.4.4.6 config

Use the config command to save/restore the connections configuration. The Access Bank II - SNMP allows the user to save one configuration in addition to the factory defaults in battery backed RAM.

Operations	Type	Comments
To restore factory	config factory	Resets all configurations to the factory
configuration		defaults.
To save current	config save	Saves current configuration to battery
configuration		backed RAM.
To display Help	config ?

14.4.4.7 connections

Use the connections command to save or display the current connections between spans and groups. This command allows the user to display all static connections and group definitions being utilized by the system.

14-20 9/24/01