Carrier Access SNMP manual 14.4.4.10dni, 14.4.4.11dialout, 14.4.4.12 ds1

14.4.4.10dni

Use the dni command to set the DNI properties for voice channels.

Operations	Type	Comments
To set signal type for n	dni s:c [n] opt
channels from s:c
To display signal type	dni signal
To set DNI channel type	dni type s:c [n] opt
To display DNI channel	dni type
type

14.4.4.11dialout

Use the dialout command to set and display enabling for the dialout alarms.

Operations	Type	Comments
To set all dialout alarms	dialout all on	To see all dialout alarm enabling
enabled		options, type dialout help
To display dialout alarm	dialout
enabling

14.4.4.12 ds1

Use the ds1 command to setup one or all the DS1 interfaces. The command specifies the interface number (1-2) and the setting to apply. The ds1 command followed by the interface number will dis- play the current configuration.

Operations	Type	Comments
To display the current	ds1 1	Displays the current setting for T1 #1.
settings of ds1 1
To display Help	ds1 ?

14-22 9/24/01