Carrier Access SNMP manual Craft, Date

Command Line Interface (CLI)

Operations	Type	Comments
To display all	connections	Displays all connections and group
connections		definitions.
To display bypass	connections bypass	Displays only bypass connections
connections		between spans. A Bypass connection
		is a nailed up configuration and
		doesn’t utilize the switch state logic.

14.4.4.8 craft

Use the craft command to set and display all options of the craft port. This command allows the user to customize the craft (management) interface for communication parameters and for remote and dia- lout access.

Operations	Type	Comments
To set the baud rate to	craft baud b9600	Sets the Baud rate to 9.6 KBps
9.6
To set bit data size 7 bit	craft data bit7	Sets the data size to 7 bits
data
To set parity to even	craft parity even	Sets the parity to Even
To display Help	craft ?

14.4.4.9 date

Use the date command to set date in the format shown: This date is used for time stamping alarms and events in the system.

Operations	Type	Comments
To configure the clock for	date 10:13:97
the current date

9/24/01 14-21