Carrier Access SNMP manual To set Snmp configurations, if required examples given below

_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____

_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____

3)Span f1[FXS12]: "FXS Channels to KSU"

d1:13 d1:14 d1:15 d1:16 d1:17 d1:18 d1:19 d1:20 d1:21 d1:22 d1:23 d1:24

4)Span f2[---]: "Analog Slot 2 - Not in Service"

_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____

•To check the configuration of the V.35 port:

Access Bank II> v35

- V.35 v1 (768000 bps)
v35	v1	circuitid	"V.35 @ 768Kbps to Router"
v35	v1	clkinv	none
v35	v1	cts	high
v35	v1	datainv	none
v35	v1	rxclk	internal
v35	v1	speed	nx64

•To set the ip configuration, if required (examples given below):

Access Bank II> ip addr 125.164.0.35

Access Bank II> ip nms1 125.164.0.4

Access Bank II> ip
ip	addr	125.164.0.35
ip	mask	255.255.255.0
ip	gateway	127.0.0.1
ip	nms1	125.164.0.4
ip	nms2
ip	nms3
ip	get	"public"
ip	set	"public"
ip	trap	"public"

•To set SNMP configurations, if required (examples given below):

Access Bank II> snmp name "Voice and Data Access Multiplexor"

Access Bank II> snmp location "Metro Parkway, Wykham"

6-6 9/24/01